Ramps/Printrboard Electronics Mounting Plate for Prusa
by engineglue, published
Wow! 446 downloads for version 4 and version 5!
The old versions have been removed and you can now download and print version 6 for your Ramps 1.4 or Printrboard electronics.
Use this mounting plate to mount your electronics to your reprap prusa mendel. If you want to mount your electronics on the front left or rear right, you'll need to download the "right" file. If you want to mount it to the front right or rear left, you'll need to download the "left" file.
The latest version of this plate is now available for download. You can also download the rest of the NWRepRap Prusa i2 from nwreprap.com.
Recent Commentsview all
Liked Byview all
Give a Shout Out
Choose the Ramps or Printrboard file and choose right or left.
Use 3 or 4 m3 bolts and 3 or 4 m3 nuts to attach your electronics to the plate. Acquire 3 small zip ties and attach the plate to your reprap or just snap it on and don't worry about the zip ties (it fits nicely into place). Then wire everything into the electronics.
NOTE: All the photos of the yellow plate are version 4. The Printrboard plate is for the Reprap Prusa Mendel.