Delicate Arch
8
Likes
145
Downloads
652
Views
Published on February 27, 2012
Description
This is a small about 4 inch model of the world famous Delicate Arch located in Arches National Park by Moab Utah. The arch was captured accurately in 3D using a FARO Focus 3D laser scanner as well as some areas captured using the free Autodesk 123D Catch which turns multiple photos from a digital camera to 3D models.
I am posting the small reduced sized STL file so everyone can 3D print their own Delicate Arch. The lines produced from a MakerBot add even more realism to this sandstone arch and you can even wash it lightly with acetone to smooth it up . The fine detailed arch is actually gigabytes in size.
You can see more on the creation of this model at
autodesk.blogs.com/between_the_lines/2012/02/delicate-arch-in-your-hand-as-a-3d-print.html
I am posting the small reduced sized STL file so everyone can 3D print their own Delicate Arch. The lines produced from a MakerBot add even more realism to this sandstone arch and you can even wash it lightly with acetone to smooth it up . The fine detailed arch is actually gigabytes in size.
You can see more on the creation of this model at
autodesk.blogs.com/between_the_lines/2012/02/delicate-arch-in-your-hand-as-a-3d-print.html
Instructions
The STL file has been reduced down to a size and complexity that can be printed on a MakerBot ToM.
You must be logged in to post a comment.
License
Delicate Arch by ShaanHurley is licensed under the Attribution - Share Alike - Creative Commons license.
More from ShaanHurley
Relevant:
http://www.youtube.com/watch?v...
This is Delicate Arch not Corona Arch with the rope swinging people. They are within 20 miles of each other but different arches. =-X