Picatinny Rail iPhone Mount
8
Likes
571
Downloads
2623
Views
Published on February 27, 2012
Description
This is a Picatinny Rail Iphone mount, it will allow you to mount your iphone on any firearm with a picatinny style mount on it.
With this Iphone mount you will no longer miss a text or a call while you are hunting, "plinking," or just having a good ol time!
I have shown it mounted to the top of an AR-15 Reciever, it can also be mounted on the botom of pistol rails and any other type of picatinny accesory rails you can find!
With this Iphone mount you will no longer miss a text or a call while you are hunting, "plinking," or just having a good ol time!
I have shown it mounted to the top of an AR-15 Reciever, it can also be mounted on the botom of pistol rails and any other type of picatinny accesory rails you can find!
Instructions
1. Print standing up with support
2. attatch to rail, use two short setscrews (1/4-20) in the 2 holes to keep it from sliding off. the plastic should be strong enough if not over tightened.
3. Pop phone in, it should just pop right on in
4. Go hunting, or shooting, or something.
5. Answer text or phone call, REMEMBER always control the direction the muzzle is facing!
I currently donot have a working printer, or an iPhone, so I can not test, sorry.
File is also in inches
File was created in Autodesk Inventor 2012
2. attatch to rail, use two short setscrews (1/4-20) in the 2 holes to keep it from sliding off. the plastic should be strong enough if not over tightened.
3. Pop phone in, it should just pop right on in
4. Go hunting, or shooting, or something.
5. Answer text or phone call, REMEMBER always control the direction the muzzle is facing!
I currently donot have a working printer, or an iPhone, so I can not test, sorry.
File is also in inches
File was created in Autodesk Inventor 2012
You must be logged in to post a comment.
Mjolnir
on
February 29, 2012
said:
Hm, this brings some ideas to mind. Using the built in accellerometers in the phone, could we then write an app for shot timing, or other statistical measurements?
jballard
on
February 29, 2012
said:
I think you could also on pistols with a rail you could graph the movement of the gun while firing to improve your aim and find out if you are limp wristing it etc.
I also thought of doing a vertical mount with cross hairs for a make shift sight device, because even if you dont look at the screen straight on the cross hairs would still be pointing at the right spot.
License
Picatinny Rail iPhone Mount by jballard is licensed under the Creative Commons - Public Domain Dedication license.
More from jballard
Hi,
did You thing about Picatinny GoPro Hero mount?