Spool roller 1
12
Likes
439
Downloads
635
Views
Published on February 29, 2012
Description
In the spirit of the spool holders based on 4 bearings.
It measure 112 x 55 x 8 mm
This one is made to fit 240mm diam. spool, 55mm from inside to inside (minimum, you can use longer bolt for larger spools).
That's the stratasys old Dimension spool found in their cartridges, the case is great but you can't see how many filament you have, thus I wanted to take it out.
[15/03/2012] added one for 50mm (smaller) spool
It measure 112 x 55 x 8 mm
This one is made to fit 240mm diam. spool, 55mm from inside to inside (minimum, you can use longer bolt for larger spools).
That's the stratasys old Dimension spool found in their cartridges, the case is great but you can't see how many filament you have, thus I wanted to take it out.
[15/03/2012] added one for 50mm (smaller) spool
Instructions
Add
4*624 bearing (bearings that fit 4mm diam. bolt)
4*M4x16 bolt (or longer)
4 or 8 mudgard washer
8 or more M4 washer (as many as needed for the spacing)
4*624 bearing (bearings that fit 4mm diam. bolt)
4*M4x16 bolt (or longer)
4 or 8 mudgard washer
8 or more M4 washer (as many as needed for the spacing)
You must be logged in to post a comment.
License
More from watsdesign
More from 3D Printer Accessories
added one for M8 threaded rods and 608 bearings