Adafruit Proto Plate for Beagle Bone
by adafruit, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a lovely plate was designed by Phil Burgess for the Beagle Bone.
Pick one up today in the adafruit shop! ------> http://www.adafruit.com/products/702
We also have tons more great Beagle Bone accessories to check out ------> http://www.adafruit.com/category/75
Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Designed by Phil Burgess for Adafruit Industries.
Creative Commons Attribution, Share-Alike All text above must be included in any redistribution
This is a lovely plate was designed by Phil Burgess for the Beagle Bone. Thin lines are cut from 3mm thick acrylic in any color. Fills are rastered on (optional. Also requires 4 plastic standoffs, 4 hexnuts, and 4 1/2" screws. 4-40 or M3 work well.
Adafruit Proto Plate for Beagle Bone by adafruit is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving adafruit a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure adafruit would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).