Stove Rocker Switch Housing
0
Likes
64
Downloads
226
Views
Published on March 10, 2012
Description
This is the rocker switch housing for my stovetop; because the switch faces upward it's designed to drain fluids out the corners instead of onto the electrical switch in the middle.
The original parts's arms broke (one at the base and the other—amazingly—right on the hook) so this design adds 0.5mm to the width of the retainer clip walls and a sturdier hook on the end.
The original parts's arms broke (one at the base and the other—amazingly—right on the hook) so this design adds 0.5mm to the width of the retainer clip walls and a sturdier hook on the end.
Instructions
I haven't fabricated this yet, but I suspect the pilot holes for the rocker switch may beed to be re-drilled to make sure they're clear so the switch seats correctly.
License
Stove Rocker Switch Housing by isolationism is licensed under the Attribution - Non-Commercial - Share Alike license.
More from isolationism
You must be logged in to post a comment.