by christinachun, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I turned this guy into a Reindog! He'll hang best with a wire or secure string looped through the hoop I added on his collar.
Separate files are available for those who wish to print the antlers separate and glue them on.
He's about 3 inches tall, 1 1/2 inches wide and 2 inches long.
Printed on my Afinia H-Series 3d Printer. Printing him with these settings takes about 2 hours.
Angle: 30 Deg
Surface: 2 Layers
Dense: 2 Layers
Space: 10 Lines
Angle: 30 Deg
Reindog Ornament by christinachun is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving christinachun a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure christinachun would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).