Razor Scraper
78
Likes
891
Downloads
1800
Views
Published on March 12, 2012
Derived from
Razer Blade Holder & Scraper
by suavepotato
Description
Here is a handy handle for your razorblade to make it easier to scrape or pry stubborn prints off your build platform.
Instructions
Print and snap in razorblade. It's a tight fit and snaps securely in place. I recommend filing down the corners of the razorblade, as it helps to keep them from slicing into the kapton on the build platform.
The scraper is intended to be used upsidedown. This way you can scrape at a low angle and pry things up without popping out the razorblade.
The scraper is intended to be used upsidedown. This way you can scrape at a low angle and pry things up without popping out the razorblade.
You must be logged in to post a comment.
AdanA
on
November 14, 2012
said:
I got several great months of enjoyable use out of mine, thanks. I've now tweaked it a bit and posted as a derivative.
bwong2k
on
June 18, 2012
said:
Very tight fit getting the razor blade in to the handle. I don't know if the razor blade is too thick on the part that snaps in or my TOM is off kilter.
Mjolnir
on
March 12, 2012
said:
I use one of these: http://www.buy.com/pr/product....
&
amp;sellerid=33465740 (it's a spatula for the Cricut paper-cutting machine), works great. No sharp corners, much harder to lacerate something important. Nice design though, don't get me wrong.
License
More from emmett
More from 3D Printer Accessories
Just needed to replace my window sticker for vehicle registration, had a few razor blades but lack strength and dexterity in my hand due to a stroke, so printed this up and got the job done. Thanks for sharing, Emmett!
Great, glad to hear it could be of assistance.