Playing field for Dominion
by flomo, published
This is a playingfield for the card game "Dominion". It helps to store and sort the decks of cards and reduces the space they need on the table.
There are enough cases (24) to play the game with all expansions.
This thing was created in the fab lab at RWTH Aachen University: http://hci.rwth-aachen.de/fablab
The playingfield has to be cut out of a 3mm board with a laser cutter. I used a MDF board but you can also use other materials.
Cut the blue lines first, then the black lines.
The arrangement of the parts is optimized for two boards. The size of the first one has to be at least 600mm x 300mm, the second one at least 400mm x 200mm.
Use the building instructions to assemble the parts.
Do not laser cut PVC, Vinyl, Neoprene!
Liked ByView All
Give a Shout Out
Playing field for Dominion by flomo is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure flomo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).