Printable Cable Passer
by ambrop7, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a slight modification to make it possible to print and assemble. Additionally the arms are shorter because I didn't want to use too much filament.
Print two rotor halves, and four stator halves. Glue the rotor halves together, and glue two pairs of stator halves together around the rotor. But first do any post-processing to make sure it fits and rotates.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Printable Cable Passer by ambrop7 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ambrop7 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ambrop7 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).