Clover Shotglass Tapered
1
Likes
277
Downloads
303
Views
Published on March 18, 2012
Derived from
Clover Shaped Shotglass
by Boort
Description
Created another of Shotglass with the profile of a 4 leaf clover to Celebrate St. Patricks Day.
This one has a rough taper to the "extrusion"
Still learning OpenSCAD
This one has a rough taper to the "extrusion"
Still learning OpenSCAD
Instructions
I drew the outline in Inkscape, then exported it with Marty McGuire's Inkscape to OpenSCAD plugin:
github.com/martymcguire/inkscape-openscad-poly
Then created the 3d model in OpenSCAD after following the MakerBot OpenSCAD Tutorial Series and adding some from the OpenScad Beginners Tutorial
makerbot.com/blog/2011/01/20/openscad-basics-2d-forms/
makerbot.com/blog/2011/01/21/openscad-basics-3d-forms/
edutechwiki.unige.ch/en/OpenScad_beginners_tutorial#2D_to_3D_extrusion
Should be printable on a 3d printer. I don't have one yet so I'm not sure how well it will work.
github.com/martymcguire/inkscape-openscad-poly
Then created the 3d model in OpenSCAD after following the MakerBot OpenSCAD Tutorial Series and adding some from the OpenScad Beginners Tutorial
makerbot.com/blog/2011/01/20/openscad-basics-2d-forms/
makerbot.com/blog/2011/01/21/openscad-basics-3d-forms/
edutechwiki.unige.ch/en/OpenScad_beginners_tutorial#2D_to_3D_extrusion
Should be printable on a 3d printer. I don't have one yet so I'm not sure how well it will work.
License
Clover Shotglass Tapered by Boort is licensed under the Attribution - Share Alike - Creative Commons license.
More from Boort
You must be logged in to post a comment.