paxtruder.mount...dxf
427 kb /
93 downloads /
2 years ago
They Like It
Paxtruder mount by CDesWorkshop is licensed under the Creative Commons - GNU GPL license.
© 2010 by CDesWorkshop
Instructions
We used PETG instead of acrylic because it is less brittle., but acrylic will work just fine.
You will need 3/16" (.165") and 1/8" (.115") PETG or any similar material.
All parts are cut out on a Universal X-660, except for the tension block, which is made of nylon.
In addition to parts from the MK4 extruder, you will also need 7 M3x30mm machine screws to mount the pieces to the motor.
