Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Gyro Eval Board Holder
0
Likes
912
Downloads
245
Views
Published on March 20, 2012
Description
This OpenSCAD script creates a holder for an STM Gyro Eval Board that fits onto the moutign holes on a Gyro_Turntable_Mounting_Plate so that it can be tested on a high speed turntable
Note:
may need to trim some stuff from the top of the cylindrical posts as there are many small components adjacent to the screw holes
Changes from previous versions:
v0.4
- removed one of the bolt holes under devices
- make it thicker (from 3 to 5 mm) so it prints better
v0.3
- adjusted some values based on callipers based measurements of board
- now it should be realistically sized
v0.2
- removed junk lines
- added cutouts
- repositioned parts
- added minkowski sum to round out corners under PCB
- made it into a printable item
v0.1
- first attempt at laying out parts
Note:
may need to trim some stuff from the top of the cylindrical posts as there are many small components adjacent to the screw holes
Changes from previous versions:
v0.4
- removed one of the bolt holes under devices
- make it thicker (from 3 to 5 mm) so it prints better
v0.3
- adjusted some values based on callipers based measurements of board
- now it should be realistically sized
v0.2
- removed junk lines
- added cutouts
- repositioned parts
- added minkowski sum to round out corners under PCB
- made it into a printable item
v0.1
- first attempt at laying out parts
Instructions
0. Build High Speed Gyro Testing Turntable :p
1. Print and cleanup holder
2. Attach STM Gyro Eval board to holder using wood/plastic screws (redrill screw holes in holder if necessary
3. Bolt to Turntable using supplied bolt holes in correct orientation
4. Test Gyro to its limits
1. Print and cleanup holder
2. Attach STM Gyro Eval board to holder using wood/plastic screws (redrill screw holes in holder if necessary
3. Bolt to Turntable using supplied bolt holes in correct orientation
4. Test Gyro to its limits
License
More from M_G
You must be logged in to post a comment.