led module
by samgalison, published
736
276
Report Thing as Inappropriate
Description
this is a case to hold an led and a battery, such that when it's stuck to a magnetized surface, it lights up.
the dimensions are 1.5" in diameter, .75" high.
the dimensions are 1.5" in diameter, .75" high.
Recent Comments
view all
Sam,
Looks cool.
You gotta edit that file a little to print on MakerBots, not sure what the little round holes are, screw holes.? I suggest dropping them as the printer is going to make a mess of those little holes, also the bottom is best flat as the printer start flat and can not print the overhangs.
Bo
bit like an LED throwie but works oly when its actually stuck to something!
i would make some, but im in the uk and my mb is currently down :(
nat
736
276
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
i've never crowd-sourced anything before, but the big RP websites are so effing expensive i thought i'd give it a try. if anyone's out there - especially in new york, with a 3D printer, can I pay you something to print out one or a few of these things?
if so, contact me at [email protected] or 617 308 9209
cheers all!
if so, contact me at [email protected] or 617 308 9209
cheers all!
Download All Files
(347 kb zip file)
Comments
You must be logged in to post a comment.
Roboteernat
on
Mar 8, 2010
said:
bit like an LED throwie but works oly when its actually stuck to something!
i would make some, but im in the uk and my mb is currently down :(
nat
Sam,
Looks cool.
You gotta edit that file a little to print on MakerBots, not sure what the little round holes are, screw holes.? I suggest dropping them as the printer is going to make a mess of those little holes, also the bottom is best flat as the printer start flat and can not print the overhangs.
Bo