Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Stackable Raspberry Pi Case

by sdeyerle, published

Stackable Raspberry Pi Case by sdeyerle Mar 25, 2012

Thing Info

18320Views 2659Downloads
Report Thing


This is a stackable Raspberry Pi case I'm working on to allow you to build small clusters of Raspberry Pi's. I don't touch CAD much (I'm an electrical engineer), but I'm pretty happy with this attempt.

I used the dimensions for the Raspberry Pi provided by Gert from the Raspberry Pi forums (http://www.raspberrypi.org/forum/projects-and-collaboration-general/beta-boards-mechanical-data), so it may not be totally accurate yet.

I printed this using a Stratasys uPrint SE in the Configurable Computing Lab at Virginia Tech (http://www.ccm.ece.vt.edu). These guys are awesome / I work here, so I need to give the obligatory shoutout. I have no idea how it would perform on a MakerBot, but it came out pretty well on the uPrint.

Also note, I have made a few modifications between the printed pictures and the uploaded STLs. I removed my name and my lab name, and fixed a few mistakes I didn't catch before my first printing.

Hope you guys like it!


I'm not really sure what to put here...

Print the parts on a decently high-res 3D printer, and they should snap together and just work! :-)

I'll update the files if need be when I actually get my hands on a Raspberry Pi. I got in on the first batch shipping from Newark, but who knows when it will actually get here.

Update 3/27/2012: I made the clips a little more beefier, added more clearance around the mini-USB connector, increased the gap on the lip so the two halves will fit together better, and increased the size of the board corner orient-er pieces so they are a bit more robust. New STLs are uploaded

Thing Info

18320Views 2659Downloads
Report Thing


Liked By

View All


Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

This version appears to be non-manifold. Can you check the file & advise? Thx.

The bottom looks like it would print on a RepRap style printer, except for the feet. A version that used 3mm filiment pegs to stack would solve that.