by ClassyGoat, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
It's the skull of Cubone's dead mother.
A must have for all PokeFans!
I've now uploaded a better Cubone Skull, check it out here: Cubone Skull 2
The 3D model for this originated from this wonderful site that rips Pokemon models from the various games: http://roestudios.co.uk/project/3d-pokemon-models
But then I made it 3D printer friendly!
I welcome anyone to make improvements / remixes of this.
Pokemon Copyright Gamefreak/Nintendo
Pokemon Fans: Check out my Real Working Fully Functional 3D Printed PokeDex
I printed this on a FlashForge Creator 1 (based off of the Replicator 1)
I used white ABS and sliced with these settings:
Exterior Support (YOU MUST USE SUPPORTS WITH THIS MODEL!)
0.25 mm Layer height
40 mm/s feedrate
55 Travel feedrate
230 degree temperature.
It took about 4 hours 30 minutes with those settings.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Cubone Skull by ClassyGoat is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ClassyGoat a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ClassyGoat would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).