Candy Heart Box
by MakerBot, published
Print your own heart-shaped box for your sweetheart.
This design is included in our Gumball Collection.
- Print 1 of every file in PLA. All .STL files are already oriented with the correct flat side facing down.
- Insert the hearts of the ÂRibbon into the heart-shaped holes of the ÂLid.
- Insert the small heart of the ÂBow into the heart-shaped hole of the ÂRibbonÂ.
- Put the ÂLidÂ on the Base.
We printed this at standard resolution with 3% infill. The ribbon took 5 minutes, the lid took 15, the bow took 5, and the base took 15. There are four files.
Liked ByView All
Give a Shout Out
Candy Heart Box by MakerBot is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure MakerBot would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).