by FabLabWellington, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Drawdio an open sourced project established by Jay Silver. The design essentially turns the act of drawing into sound, through the conductivity of graphite and interconnecting touch, through the conductive human body. The sound produced fluctuates depending on the resistance between pencil point and finger point.
Our objective is to develop the existing design by directing the project into a stage of refinement. Starting with reducing the scale of the electrical components, as well as in housing the design but still allowing creative freedom for further iterations. Our contribution to the Drawdio design introduces digital manufacturing, by implicating the use of milling PCB boards and 3D printing.
By Ben, Chad, Emma & Maddie
For more information about our design process see our blog http://opendesignprojectwgtn.blogspot.co.nz
Full instructions on our blog at http://tutorialdrawdio.blogspot.co.nz
Drawdio by FabLabWellington is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving FabLabWellington a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FabLabWellington would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).