Toilet
10
Likes
345
Downloads
362
Views
Published on April 3, 2012
Description
My cousin requested a micro-toilet...so here it is. This was taken from the Sketchup 3D Warehouse, resized and converted to an STL for printing. The original model is by 190Mike and is located here:
sketchup.google.com/3dwarehouse/details?mid=b843d4713d5723eba35a7666f0cfa5bb&prevstart=0
sketchup.google.com/3dwarehouse/details?mid=b843d4713d5723eba35a7666f0cfa5bb&prevstart=0
Instructions
Note 1: Print using a fan. The bottom 1/3 of the bowl in my print is messed up because I had turned the fan off for the first few layers and forgot to turn it back on.
Note 2: I sliced this with Slic3r 0.7.1 and I had to set "infill every n layers" to 1 otherwise Slic3r would crash (a known, reported (by me) issue). This produces a print that is far too solid for what it is. Which means it uses a lot more filament then it needs to.
Note 3: The bowl did not print hollow although I wish that it had. I haven't looked into it but it could have become "not hollow" when I sliced it.
Note 2: I sliced this with Slic3r 0.7.1 and I had to set "infill every n layers" to 1 otherwise Slic3r would crash (a known, reported (by me) issue). This produces a print that is far too solid for what it is. Which means it uses a lot more filament then it needs to.
Note 3: The bowl did not print hollow although I wish that it had. I haven't looked into it but it could have become "not hollow" when I sliced it.
License
More from QuantumConcepts
You must be logged in to post a comment.