Hole Gauge for Laser Cutter
by LucidOne, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is Thing-a-Week #6, previous things can be found here.
This is a metric drill gauge that is useful for making lasercut parts.
The holes are marked as drawn, so the actual holes will be large depending on your laser cutter. The holes range in size from 1.0mm to 10.9mm in 0.1 mm increments.
The file is premade for Ponoko's Laser cutting service www.ponoko.com. Export as an eps file from inkscape after you fill the rest of the space.
Use a sharpie to fill in the letters and immediately wipe clean. Use paint thinner sparingly if necessary.
Upgrade this Thing with Thingiverse Apps
Hole Gauge for Laser Cutter by LucidOne is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving LucidOne a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure LucidOne would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).