Beefy Wade Extruder Gears
9
Likes
602
Downloads
1366
Views
Published on April 4, 2012
Derived from
Wade's Geared Nema 17 Extruder
by Wade
Description
My Wade extruders are now under fire since over one year and still doing great. The most used one now has some noticeable slackness and I need to soon replace the gears. I decided to make a bit more beautiful gears with a beefed-up teeth-area. This is the result... enjoy!
Tech data:
11 x 39 teeth-ratio
Bore on small pully is made for Ø 5mm motor axle and has space for 3 M3 set screws (press in M3 nuts...)
Tech data:
11 x 39 teeth-ratio
Bore on small pully is made for Ø 5mm motor axle and has space for 3 M3 set screws (press in M3 nuts...)
Instructions
1. Print (before your old gears looses it's teeth
2. Replace your old gears
Material needed:
M3 nuts & Set screws (6mm lenght will be fine)
2. Replace your old gears
Material needed:
M3 nuts & Set screws (6mm lenght will be fine)
License
More from elk
You must be logged in to post a comment.