Tough Print in place Carabiner
by bearink, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Hi, Quickly designed Carabiner
Prints in place without support.
Picture was printed in PETG, 150 micron, 2800mm/s, 50%infill, 90% Scale
Printed using MGChemical White PETG 240°nozzle , 75° bed
File size is pretty big, I did crank the STL Precision a litttle too high
Will soon upload a lighter model And a smaller version (this one doesnt fit my keychain)
Designed using Solidworks PM for the model if you want to try and edit it
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Tough Print in place Carabiner by bearink is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving bearink a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bearink would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).