Rovio Laser Scanner
5
Likes
274
Downloads
703
Views
Published on April 2, 2010
Description
This is Thing-a-Week #7, previous things can be found here. iheartrobotics.com/search/label/thing-a-week
This is a proof of concept laser scanner for the WowWee Rovio mobile webcam. It uses a $15 12mm diameter laser line generator purchased from eBay and is based on the laser scanner design described here.
seattlerobotics.org/encoder/200110/vision.htm
This is a proof of concept laser scanner for the WowWee Rovio mobile webcam. It uses a $15 12mm diameter laser line generator purchased from eBay and is based on the laser scanner design described here.
seattlerobotics.org/encoder/200110/vision.htm
Instructions
Print and enjoy.
This is designed for the 3BT-P8003-00 screws, which are similar to the ones tested here.
iheartrobotics.com/2010/03/fastners-for-3d-printing-screw-it-well.html
This is designed for the 3BT-P8003-00 screws, which are similar to the ones tested here.
iheartrobotics.com/2010/03/fastners-for-3d-printing-screw-it-well.html
You must be logged in to post a comment.
License
Rovio Laser Scanner by IHeartRobotics is licensed under the Attribution - Non-Commercial - Share Alike license.
More from IHeartRobotics
Excellent design, I was thinking of doing something similar but for an
array of leds and with some support further up the body of the rovio.
I am also building a 3d scanner but I am using a piece of transparent
PLA taped to the front of an ordinary laser pointer to get the laser line.
Works quite well, a glass / crystal wine glass stem works better.
K.