Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
decorated iris box
71
Likes
1422
Downloads
1480
Views
Published on April 15, 2012
Derived from
A fool-bot proof iris box
by bobson_h
Description
I intend to use for dice in a steam punk game.
Instructions
Printout five of the shutters.
Printout one each of the decorated body that retaining ring and the locking ring. The assembly STL file shows you how these go together, though I have only shown two of the shutters.
I used five M3 x 25 mm countersunk screws to hold this together.
My printed version works very smoothly though your clearances may vary.
It is possible to put this together with out the retaining ring the screws will hold the shutters in place by themselves. This shows off the mechanism more.
I intend to add some decoration to the locking ring and the shutters so this is still a work in process.
Printout one each of the decorated body that retaining ring and the locking ring. The assembly STL file shows you how these go together, though I have only shown two of the shutters.
I used five M3 x 25 mm countersunk screws to hold this together.
My printed version works very smoothly though your clearances may vary.
It is possible to put this together with out the retaining ring the screws will hold the shutters in place by themselves. This shows off the mechanism more.
I intend to add some decoration to the locking ring and the shutters so this is still a work in process.
Collections
Interesting Ideas
by Juwarhala
Things to Make
by Juwarhala
Mechanisms and moving parts
by jessthemullet
License
decorated iris box by Robhumm is licensed under the Attribution - Share Alike - Creative Commons license.
More from Robhumm
Would you be able to post the .prt files?
I am using Pro desk top. .prt are solid works? I can post (quick check )
MEDUSA model files, IGES, STEP, VDA and SAT
are any of them of use?