Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Kitchenaid stand mixer to Milescraft 90 degree drill adapter
by Chinasaur, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Prototype for coupling the Kitchenaid stand mixer attachment hub to a Milescraft 1390 90-degree drill adapter.
This piece failed fairly quickly, with the set screws getting forced back over their threads and no longer gripping the Milescraft shaft. But I think if you just screw the set screws directly into the tap holes rather than tapping the holes first the fit will be tighter and more long-lived. The newer model is very similar and has lasted longer so far with this approach.
There are two holes at tap size #29 designed for 8-32 set screws (3/16" length is good). McMaster 94355A182 is fine, for which you'll want hex key 7122A15. For most 3D print materials, you're better off driving the set screws directly into the piece rather than trying to tap the piece first. that will keep the fit tighter and hopefully the piece will fail less quickly.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Kitchenaid stand mixer to Milescraft 90 degree drill adapter by Chinasaur is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Chinasaur a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Chinasaur would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).