Keyfob / luggage tag / zipper pull from CT Scan
by the_digital_dentist, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Made from my CT scan.
You can download the CT scan dicom multifile here:
You'll need to do a lot of work to process it into printable files- use Slicer (not Slic3r), Osirix, or DeVIDE to process the data, then clean up in MeshLab, then smooth in Blender.
Printed on MegaMax using Octave fluorescent red ABS filament. Sliced using Slic3r, first layer 0.35 mm, next 10mm of layers at 0.2mm, final layers at 0.15mm (use the settings tab on the plater page of Slic3r).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Keyfob / luggage tag / zipper pull from CT Scan by the_digital_dentist is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving the_digital_dentist a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure the_digital_dentist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).