Thingiverse
3D Printing 3D Printer Accessories

Prusa Simple Spool Mount (angled)

ceterumnet
1355
Downloads
1082
Views
Published on April 16, 2012

Derived from

Prusa Simple Spool Mount and Filament Guide
by QuantumConcepts

Description

This is a simple spool mount that sits on top of a Prusa.

**UPDATED**

I added 2 more files:
1. stl with v2 suffix
2. skp with v2 suffix

Based on Maxinux's feedback - it was just a few mm from clearing properly with a 5lb spool. This mod should give the proper clearance.

Instructions

1. Print 2 of the spool hubs
2. Print 2 of the angled spool holders
3. Cut a piece of threaded rod about 160mm in length

Assemble...

I haven't used this extensively yet - so please let me know if you run into any major issues.

The spool hubs fit a ~50mm hole in a spool.
Tags
This Thing has no tags.
Report as inappropriate

You must be logged in to post a comment.

babolatpdtp on May 22, 2012 said:

Can you post the .skp of the spool hub? my hole is around 39mm so i need to be able to adjust it

ceterumnet on May 23, 2012 said:

I've attached the 175 hub2.stl and the 175 hub.skp
&
lt;- it should probably already be sized to your spool.

cheers,
dave

QuantumConcepts on April 17, 2012 said:

Nice, I was going to edit my original to angle the arms in order to get some more clearance but now I don't have to! 8-)

Collections

View all
prusa v2
by juanmahl
Things to Make
by Vhailor
Printer Improvements
by jbollander

Remixes

Made

View all

Liked by

View all

License

Prusa Simple Spool Mount (angled) by ceterumnet is licensed under the Attribution - Share Alike - Creative Commons license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

More from ceterumnet

iPhone_case_v2

More from 3D Printer Accessories

⇪