Megatronics 2.0 Mounting for Mendel
by DB3JHF, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This thing should help you to fix your Megatronics 2.0 board on your printer.
Mendel: It can be fixed with three standard clamps (from the mendel files) and M3 screws.
A standard 40mm fan (same as for the hotend) or 80mm fan can be mounted on the FanBoard (M4 screws needed for that).
Print the Board
Decide and Print FanBoard :
Select if you want the FanBoard with or without spacers.- If you decide for the board without spacers you'll need additonal M3 x 20mm (30mm) Spacers. There are two different FanBoards either for 40mm fan or for 80mm fan.
- (Optional): Print the grill for the fan
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Megatronics 2.0 Mounting for Mendel by DB3JHF is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving DB3JHF a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DB3JHF would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).