Duomo di Milano by WeFab

Models Buildings & Structures

Duomo di Milano

WeFab

Likes

555

Downloads

1611

Views

Published on April 19, 2012

This thing was Featured on April 20, 2012

Description

We did this Duomo because we accepted the challenge of Dominic Wilcox: artist vs 3d printer - make the Milanese Cathedral in 90 minutes during Design Week 2012.
We print it with our Deep Pink Makerbot and he's going to craft it by hand.
variationsonnormal.com/2012/03/20/wilcox-vs-3d-printer-duomo/

Abbiamo costruito il modello del Duomo di Milano accettando la sfida dell'artista Dominic Wilcox di costruire la cattedrale milanese in 90 minuti durante il Salone del Mobile 2012.
Noi lo stampiamo con la nostra Deep Pink Makerbot e lui lo realizza a mano.
wefab.it/news/wilcox-vs-wefab-la-prima-sfida-uomo-contro-stampante-3d/

youtube.com/watch?v=H1F0aQ_2lKo

vimeo.com/40622063

vimeo.com/40398799

Instructions

il file stl è fatto in scala per essere stampato in un'ora e mezza
il file skp è in scala 1:1000

Aiutateci a vincere la sfida stampando anche voi un Duomo o migliorando il file!
La collaborazione open-source è qualità che tende all'infinito

------------------------------

The file gets printed in 90 minutes
The Milan Duomo is scaled 1:1000

Help us win the challenge printing or improving the Duomo yourself!
Open-source Collaboration is quality tending to infinity

Tags

This Thing has no tags.

Report as inappropriate

casentim on December 23, 2012 said:

I had less luck slicing. there is a hole in the roof. Also some problems with overhang on the inside of the model.
I fixed the hole in the roof and the overhang. I will print a new one when i have the time. Will upload the new file if i prints correctly.

WeFab on April 28, 2012 said:

Dear MacGiver, sorry for the errors! We are happy u succeded in printing it

MacGyver on April 23, 2012 said:

I'm getting tons of these errors: "Dangling edges, will use intersecting circles to get import layer at height" errors slicing this thing. Also a bunch of the following errors:

This should never happen, there is a hole in the triangle mesh, each edge should have two faces.

[14:57:44] 687 [401] [323, 324]

[14:57:44] Something will still be printed, but there is no guarantee that it will be the correct shape.

[14:57:44] Once the gcode is saved, you should check over the layer with a z of:

[14:57:44] 27.45

I'm going to power through the errors and try to print it anyway. You'll know if I was successful if you see something show up under the "I made one" section.