MendelMax Laser Cut Y Axis
Description
Laser cut Y axis frame for MendelMax
Instructions
Laser cut from 6.35mm (1/4") wood.
Note: The heated table rests directly on top of the carraige, so this should be cut from wood only. Plastic will melt and warp.
Note: The heated table rests directly on top of the carraige, so this should be cut from wood only. Plastic will melt and warp.
You must be logged in to post a comment.
DarkStar2k
on
April 28, 2012
said:
Can you put some measurements in here so I can get the scale right. When my friend with a lasercutter loaded this in his software it was tiny so we had to scale it up. Problem is I dont know exactly how big it should be.
License
MendelMax Laser Cut Y Axis by kludgineer is licensed under the Attribution - Creative Commons license.
More from kludgineer
Is there a DXF for a thinner material (aluminum)? I have access to a waterjet but not a laser. Alternatively, is there a 3d cad model that I can update the material sizes for?
Thanks!
No, and I will not likely have time to make one in the near future unfortunately. Reahhy, this deisgn is optimized for wood, making it in metal would require different design decisions, so it should be pretty substantially redesigned for that.
The 3d model is included in the MendelMax 1.5 files.