Improved Logitech Webcam to Microscope Adapter
by the_digital_dentist, published
A redesign to accommodate taller eyepieces such as the inexpensive AmScope 10X WF. The tube and camera holder are printed separately to avoid using support material. The two pieces are glued together with superglue.
This fits the Logitech Quickcam Pro for Notebooks and other models that use the same case, and B&L Balplan microscope with 31.1mm dia eyepiece tube.
Video shot using this adapter here: https://vimeo.com/83166718
Printed with Octave black ABS, 0.35 mm nozzle, 0.35mm first layer, 0.2 mm layers for all others. 20% infill, no support material.
After gluing be sure to let the glue harden completely before putting the adapter on your camera or microscope- superglue vapors are very good for rendering fingerprints visible! When you glue, carefully align the edge of the tube with the edge of the camera holder.
Video shot using this adapter can be seen here:
Liked ByView All
Give a Shout Out
Improved Logitech Webcam to Microscope Adapter by the_digital_dentist is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving the_digital_dentist a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure the_digital_dentist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).