Grenade Container
63
Likes
1126
Downloads
1800
Views
Published on April 20, 2012
Description
A friend had been wanting a Grenade. I had seen a few designs already, and really liked some, but wanted to add some additional functionality.
Not to completely reinvent the wheel, I incorporated a few of those designs and made the thing modular.
After many Boolean operations, and due to poor planning, I accidentally created a locking feature with a ridge on the opening of the grenade body.
I got griped at for taking this into a public place.. I really didn't consider that either..
Not to completely reinvent the wheel, I incorporated a few of those designs and made the thing modular.
After many Boolean operations, and due to poor planning, I accidentally created a locking feature with a ridge on the opening of the grenade body.
I got griped at for taking this into a public place.. I really didn't consider that either..
Instructions
I'm a bit paranoid about overhangs and bridges, so I actually rotated the top 180 before printing.
Just added the file top_tall_safe_fixed It has been rotated and scaled properly. The prior version was under size by a factor of 10...
The body needs no modification before printing.
One of thingiverse.com/thing:10718 will need to be printed and attached using a ~4x10+ screw. There are additional instructions for spring loading and a pin for that thing... It will also have the aperture logo on the back, which may or may not be desirable (one reason for modularity...)
Just added the file top_tall_safe_fixed It has been rotated and scaled properly. The prior version was under size by a factor of 10...
The body needs no modification before printing.
One of thingiverse.com/thing:10718 will need to be printed and attached using a ~4x10+ screw. There are additional instructions for spring loading and a pin for that thing... It will also have the aperture logo on the back, which may or may not be desirable (one reason for modularity...)
You must be logged in to post a comment.
MacGyver
on
May 6, 2012
said:
I'm printing the bottom right now and it looks like there is a strange layer problem where part of the bottom prints slightly higher than than the other half. Doesn't look like it will affect the overall model though.
etrubilla
on
April 23, 2012
said:
I must be missing something simple on the top tall safe file. When I load it, it is way to small and I am playing with ratio's to try and find a happy spot. Can you give me a tip for what size to go with? Thanks for a great model!
Landru
on
April 20, 2012
said:
Nice!
I can upload a version of the grenade handle without the logo. I had never considered using my part in a non-lemon capacity ;)
Collections
Mechanisms and moving parts
by jessthemullet
Things to Make
by Prototype22
Things to Make
by lp120666
License
More from Octovir
More from Containers
Hi can you share the design files?