11-in-1 calibration block (English / SAE)
by GadgetGuru314, published
11 tests on one calibration block.
Requires calipers to measure min/ max feature sizes for your printer. Recommended print fill is 5%.
Metric Version: http://www.thingiverse.com/thing:423263
horizontal and vertical hole diameters
3-axis feature minimum feature width test
scaling accuracy (via 1/2'' x 1/2'' x 1/2'' cube cutout)
rounded feature minimum size
fillet minimum size
max tower height to diameter ratio
Max build hangover angle test (30 - 80 degrees)
minimum layer thickness
modified dimensions of block (excluding pillars) to 3.375'' x 1'' x 1.25''
added more text in v1.3 along with a couple extra protrusions.
Liked ByView All
Give a Shout Out
11-in-1 calibration block (English / SAE) by GadgetGuru314 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving GadgetGuru314 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure GadgetGuru314 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).