OrangeRX TX Case
by Japala, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I'm planning on installing the transmitter module from the OrangeRX as a receiver to my S800 Sky Shadow. The original case for the TX module is quite big so I wanted to try to make a bit smaller 3D printed case for it. Managed to get it done and for my personal use even this small reduction in height was enough to get this mounted nicely.
After you have printed this and want to put everything together, there is still one more step you need to make. You need to heat the legs of those leds with a soldering iron and push them down a bit. You may even like to shorten that button shaft but can be left as it is.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
OrangeRX TX Case by Japala is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Japala a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Japala would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).