SolarRoboFlower Kit 1.1
by hackerspaceshop, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Remember Daniels cool SolarRoboFlower?
We made a kit out of it and a new design for the acrylic parts.
Please check out the detailed assembly instructions found here http://instructions.hackerspaceshop.com/solarroboflower1.1/
Daniel and I put together a complete kit with over 130 parts needed to assemble a solarroboflower yourself.
We also made custom electronics and wrote a new firmware.
Check it out in our shop found here http://http://www.hackerspaceshop.com/robotics/solarroboflower-kit
We also sell a version of the kit without the acrylic parts if you have your own lasercutter that can be found here http://www.hackerspaceshop.com/robotics/solarroboflower-noacryl-parts.html
Make sure to use 3mm acrylic that was EXTRUDED because there are quite sophisticated snap and interlock mechanisms built into this kit and the materialtolerance is set for only 5%..
Upgrade this Thing with Thingiverse Apps
SolarRoboFlower Kit 1.1 by hackerspaceshop is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving hackerspaceshop a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure hackerspaceshop would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).