Vegetable Garden Bed
6
Likes
84
Downloads
838
Views
Published on April 22, 2012
Description
Thus is a sketchup design for a raised bed vegetable garden for an area just over 100 square meters.
Instructions
Each bed is 1.25 meters wide (4 foot). The whole garden covers a 10.5m square, though I have also put a path around the outside.
Length Number of boards
1250mm 16
1450mm 16
2050mm 6
2250mm 6
3400mm 6
3600mm 6
4200mm 6
4400mm 6
5550mm 6
5750mm 6
All boards are 100mm x 200mm
There are two layers, so the beds are 400mm high.
It took 22 cubic meters of garden mix to fill.
I built this using untreated macrocarpa.
The boards are attached using 200mm screws. The base is free standing, and so is the second layer. The wood is heavy enough that it doesn't move.
Length Number of boards
1250mm 16
1450mm 16
2050mm 6
2250mm 6
3400mm 6
3600mm 6
4200mm 6
4400mm 6
5550mm 6
5750mm 6
All boards are 100mm x 200mm
There are two layers, so the beds are 400mm high.
It took 22 cubic meters of garden mix to fill.
I built this using untreated macrocarpa.
The boards are attached using 200mm screws. The base is free standing, and so is the second layer. The wood is heavy enough that it doesn't move.
License
Vegetable Garden Bed by Inquisitor is licensed under the Attribution - Share Alike - Creative Commons license.
More from Inquisitor
More from Outdoor & Garden
Not sure this can be printed on a 3d printer system...
Might be better suited in Instructables
but looks good as a 'project thing'!