Tank Miniatures for Ogre Designer's Edition
by falconphysics, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Last weekend I was re-exposed to the game Ogre. My friend got the new Ogre Designer's Edition (go out and get it now, before they run out) which has some great cardboard cut out Ogres, but only flat pieces of cardboard for the other units. Playing with the flats for tanks was a bit unsatisfying. So I dug around in my game closet and found my old minis for the game. It seems I only have Combine units and could use some for the enemy.
Here's my start on some really low resolution versions of the Panuropean units. The idea is to replace to cardboard flats with versions that can just be tossed into the box without worrying about breakage.
The material presented here is my original creation, intended for use with the Ogre system from Steve Jackson Games. This material is not official and is not endorsed by Steve Jackson Games.
The models were created in Tinkercad. Printed with 1 shell, 10% infill, and 0.2 mm layer height on a Replicator.
The barrels of the Heavy and Superheavy tanks did not print well, so I replaced them with jumbo paperclips cut down to size. The diameter is a little smaller than I'd like, but I'm not really going for hyper realism or detail.
The Mobile Howitzer needs to be re-done. The barrel does not print well. I will probably replace it with a toothpick.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Tank Miniatures for Ogre Designer's Edition by falconphysics is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving falconphysics a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure falconphysics would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).