Raise3D Clip for spoolholder
by ABH_, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a useful little thing for 750 g spools on Raise3D printers.
When using 750 g filament spools there's a problem with filament being trapped between the printer and the filament spool when the alternating push-draw makes the filament come off the spool. The filament is occasionally pushed back when the printerhead travels from far away from spool to close to the spool. There's then a risk that the filament jams and get stuck and eventually breaks when the extruder pulls. This happened for me as well, when I first got the printer and used other filaments than the large 1 kg spool from Raise3D.
Some solve this problem by adding a guide tube from the extruder to the printers top plate, but that's not necessary, - this little clip, that serves to keep the smaller spools very close to the printer, solves the problem perfectly. Never had issues with filament coming off the spool after starting to use this clip.
The clip prints without supports, as support is built-in. You have to break away the small taps in the slot.
Fillamentum ABS Extrafill Traffic Black
Extruder temperature 235 °C.
Bed temperature 110 °C.
0% fan speed, 100% fan speed during bridging.
Extrusion width 0.4 mm.
Layer height 0.1 mm, first layer height 0.2 mm.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Raise3D Clip for spoolholder by ABH_ is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ABH_ a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ABH_ would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).