Mattel Electronics Battery Cover
by gsargent, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
If you have any of the old 70's Mattel Electronics sports handheld games this is a replacement battery cover for them. It was designed off a Mattel Electronics Baseball game but they all used the same cover. Print it in the closet color filament you have to match your game and enjoy.
Note: I did have to print this with supports for the tongue to come out correct. I used supports every 1mm but you could probably get away with 2mm or 2.5mm spacing. Also I printed this in PLA and it is much stiffer than the original plastic the game housing is made of so be careful when removing so you don't break your game.
Prusa I3 MK2
To make it easier to remove from your game you may want to trim down the height on the catch on the tongue.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Mattel Electronics Battery Cover by gsargent is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving gsargent a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure gsargent would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).