Duckbox
17
Likes
478
Downloads
973
Views
Published on April 27, 2012
Derived from
Rubber Ducky
by MetrixCreateSpace
Description
A duck that is also a box for little things, sweets and such!
I was thinking about how to print MetrixCreateSpace's ducky. I considered printing the beak separately, which led to the idea of a little container with the beak as plug.
The beak has been scaled by .97 in all dimensions, which provided the right clearance for my model.
The top third of the head and the top ~10% of the body are solid, because bridges were easier to pull off than overhangs.
I was thinking about how to print MetrixCreateSpace's ducky. I considered printing the beak separately, which led to the idea of a little container with the beak as plug.
The beak has been scaled by .97 in all dimensions, which provided the right clearance for my model.
The top third of the head and the top ~10% of the body are solid, because bridges were easier to pull off than overhangs.
Instructions
Printed fine in ABS on my TOM with 2 shells. The walls are currently ~2 mm thick; keep that in mind if you are going to scale Duckbox down.
More from Ushanka
More from Containers
You must be logged in to post a comment.