Helmet mount for Contour video cameras
9
Likes
397
Downloads
1015
Views
Published on April 28, 2012
Description
I didn't think the mounts that came with my Contour Roam were trustworthy so I quickly designed this one. It's got a bit of a curve on the mounting surface to match the side of a helmet.
Includes a detent bump with an integral springy rail behind it so the camera snaps into place.
This should be in pretty good shape as is but I have not ridden with it yet.
Includes a detent bump with an integral springy rail behind it so the camera snaps into place.
This should be in pretty good shape as is but I have not ridden with it yet.
Instructions
Print, clip your camera to it, decide where on your helmet to mount the camera. Apply double sided foam tape to the mounting surface and use a zip tie to secure through helmet vents. Note that there is a bump with a spring detent behind it along the rails - this goes toward the FRONT of the camera (at least it does on the Roam) to hold the camera in place.
The SCAD file is there if you need to tweak this for your situation.
The SCAD file is there if you need to tweak this for your situation.
License
Helmet mount for Contour video cameras by jridley is licensed under the Attribution - Creative Commons license.
More from jridley
More from Sport & Outdoors
You must be logged in to post a comment.