Super Mario Pipe
by djhempy, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
based on the pipe from Super Mario Bros. 3
Use it to hold things or as a flower pot! :D
UPDATE: new version here: http://www.thingiverse.com/thing:32207
There are two versions of this. One is one solid piece, the other is in two parts (separate stl files), which is more printer friendly. I haven't tried printing out the solid one, but it should be fine if printed with support material.
I would suggest coating the inside with a water proof material such as spray-on enamel if you intend to use it as a flower pot. I printed mine with two perimeters and filled it with water. I dumped it out after about a minute and could hear water inside when I shook it.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Super Mario Pipe by djhempy is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving djhempy a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure djhempy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).