by deltapenguin, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I made a pair of stand for Chario Reference 100 speaker.
The stand is composed of 26.5 mm steel tube, two pieces of MDF plates, one upper mount and one lower mount, four spikes that came with the original stand.
1st layer temperature: 250 C
other layer temperature: 240 C
Brim: 3 mm
The average printing time was two hours and thirty minutes.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Speaker stand by deltapenguin is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving deltapenguin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure deltapenguin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).