Small Camera Servo Mount
by LucidOne, published
This is Thing-a-Week #8, previous things can be found here. http://www.iheartrobotics.com/search/label/thing-a-week
This weeks thing is a servo mount for the Point Grey Flea2 and Chameleon Cameras. These cameras are fairly popular for robotics since they have a global shutter which is often critical for machine vision tasks.
This can be used to provide pan or tilt control of the camera with an standard servo.
Print and enjoy.
Requires HiTec HS-325HB Servo or equivalent and four M1.6 screws or four M2x6mm screws and M2 nuts.
Liked ByView All
Give a Shout Out
Small Camera Servo Mount by LucidOne is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving LucidOne a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure LucidOne would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).