Laser-cut brackets for wall mounting pretty much anything
by Jarrett, published
More for inspiration than anything else. You'll have to redraw the clip parts can hold whatever you're mounting if it's a different size. I mounted 8mm cedar planks.
Some design tips, if you're redesigning for your specific case:
Don't use acrylic. It's very brittle on that axis, and it will shatter and dump your entire wall on the ground.
Make sure your material can fit in the slots of your wall rails! I had to dremel them down.
Those curvy bits are necessary. When you push your planks (or whatever) into the clips, those curves will sort of uncoil and provide stress relief.
Liked ByView All
Give a Shout Out
Laser-cut brackets for wall mounting pretty much anything by Jarrett is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Jarrett a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Jarrett would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).