Spooler For Lulzbot PowerSupply
2
Likes
259
Downloads
417
Views
Published on May 8, 2012
Description
This is a spool roller that attaches to a Lulzbot power supply.
lulzbot.com/en/71-12vdc-20a-240w-power-supply.html
It's working well and easily adjustable for different sized spools. Should also work to hold two spools for a dual extruder setup.
lulzbot.com/en/71-12vdc-20a-240w-power-supply.html
It's working well and easily adjustable for different sized spools. Should also work to hold two spools for a dual extruder setup.
Instructions
Print the STL two times and assemble with 8mm threaded rod 120mm or greater.
I used the stock prusa z leadscrews(210mm)that are wide enough for two spools. Use 4 608 bearing. The ribs attach to the power supply with 6 M4x10mm screws. You can modify the SCAD file to fit different dimensions or to print better on your machine. The scad does depend on MCAD.
github.com/elmom/MCAD/zipball/master
I used the stock prusa z leadscrews(210mm)that are wide enough for two spools. Use 4 608 bearing. The ribs attach to the power supply with 6 M4x10mm screws. You can modify the SCAD file to fit different dimensions or to print better on your machine. The scad does depend on MCAD.
github.com/elmom/MCAD/zipball/master
You must be logged in to post a comment.
License
More from ocularb0b
More from 3D Printer Accessories
Great design, i really like it.
Can you tell me something about that external mounted extruder body with gears? Really like the idea. Any place where one can find it?
I just added that thing, http://www.thingiverse.com/thi....
Works well so far.