Loading

AO-100 3D Printer

by AlephObjects, published

AO-100 3D Printer by AlephObjects Aug 21, 2012

Description

The AO-100 is a MendelMax variant printer that has been slimmed down for a smaller foot print that matches the print size of the Prusa Mendel.

With an aluminum extrusion frame the AO-100 is an extremely sturdy printer capable of printing quality parts at high speeds. The design is made to be used with Igus pillow block bushings that allow for precise movement with a high performace bushing. The reliable MK1 PCB heat bed is used to heat the borosilicate glass print surface. Although other electronics can be used, the included electronics mount is for the tested and true RAMPS 1.4/Arduino RepRap electronics.

All of the source files including CAD files, print files, BOM, and manual are available at download.lulzbot.com/AO-100.

The AO-100 is also available, completely assembled and calibrated, at LulzBot.com.

Licensing
-Parts and files: GPLv3
-Images: CC BY SA

Recent Comments

view all

I just want to say thank you for share the information and tell you that your printer is amazing!
Congratulations!

Your manual is well done, also the tips you give!

You can find the product specs on the product page here: http://www.lulzbot.com/en/3d-p.... However, thanks for the feedback. We'll add a Products Specifications in the manual and upload a revision.

More from 3D Printers

view more

Makes

Liked By

view all

License

GNU - GPL
AO-100 3D Printer by AlephObjects is licensed under the GNU - GPL license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

The AO-100_print_parts.tar.gz files includes all of the needed print files. In AO-100_BOM.ods you can find the required part count including all of the needed hardware.

We have made an extensive manual for the AO-100 3D printer. Although this manual is specifically for the AO-100 it is also informative on general setup for a first time 3D printer user.

Comments

You must be logged in to post a comment.

DanyTW on Oct 11, 2013 said:

I just want to say thank you for share the information and tell you that your printer is amazing!
Congratulations!

Spiritdude on Aug 21, 2012 said:

I read the user manual, but couldn't find the building / printing size?

AlephObjects on Aug 21, 2012 said:

You can find the product specs on the product page here: http://www.lulzbot.com/en/3d-p.... However, thanks for the feedback. We'll add a Products Specifications in the manual and upload a revision.

jebba on Aug 21, 2012 said:

Spiritdude, there are some more specs on the product page in the store:

Usable Print Area: 200mm x 190mm x 100mm (7.9in x 7.5in x 3.9in)

Overall Dimensions: 464mm x 483mm x 381mm (18.3in x 19in x 15in)

Weight: 8.18kg (18lbs)

Usable Print Area: 200mm x 190mm x 100mm (7.9in x 7.5in x 3.9in)

Top Print Speed: 200mm/sec (7.9in/sec)

Print Tolerance: 0.2mm (0.008in) in
X any Y axes. Z axis is dependent on layer thickness

Layer Thickness: 0.1mm (0.004in) to 0.75mm (0.029in), with optional nozzles: 0.25mm (0.01in), 0.35mm (0.014in), 0.5mm (0.02in), and 0.75mm (0.029in)

Supported Materials: ABS and PLA plastic filaments

Usable Filament Sizes: standard 3mm (0.1in)
and 1.75mm (0.007in)

Top