Loading

Kinect Targus Quick Release Tripod Adapter

by DDRBoxman, published

Kinect Targus Quick Release Tripod Adapter by DDRBoxman May 10, 2012

Description

A mount to attach a Kinect to a Targus compatible tripod.

Recent Comments

view all
Yup, IHeartRobotics has more details about what screws to use thingiverse.com/thing:5004#comment-650756755
Gotcha. How are you connecting it to the Kinect base? Are you running screws through the mount holes into the guide pin holes on the Kinect base?
I believe that there are there to stick up into the recess that the kinect base has. They definitely aren't necessary. They were just in the original model that I derived this version from.

More from Camera

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag
Hello. I tried printing your mount but it has feet that stick up from the base. The printer builds the little feet first and then tries to lay down the main section but it dribbles the glue b/c the hot end is now at a the height of the feet that were created.

Here's a profile pic of the base where you can see the feet:

i.imgur.com/f73VI1A.jpg

Is there any reason it has the feet on the bottom? Could I slice them off the model and just build from a flat base?
I believe that there are there to stick up into the recess that the kinect base has. They definitely aren't necessary. They were just in the original model that I derived this version from.
Gotcha. How are you connecting it to the Kinect base? Are you running screws through the mount holes into the guide pin holes on the Kinect base?
Yup, IHeartRobotics has more details about what screws to use thingiverse.com/thing:5004#comment-650756755
TriK Tripod Adapter for the Kinect
Top