Minimal Surface Pencils Holder - Math Art by Dizingof
78
Likes
859
Downloads
2863
Views
Published on May 12, 2012
Description
This is a Minimal Surface i designed as a Pencils Holder.
Who says Math is no fun..
Size: 100x100x100mm
Wall thickness: 3mm
3D print it with ABS, PLA
** I've uploaded a thicker version
Who says Math is no fun..
Size: 100x100x100mm
Wall thickness: 3mm
3D print it with ABS, PLA
** I've uploaded a thicker version
Instructions
No instructions provided.
You must be logged in to post a comment.
BSchuler
on
May 13, 2012
said:
Finally was able to print a Dizingof model! 12 hour print on a Makerbot Replicator and it immediately is self-destructing. Beautiful but highly stressed design for ABS - may have to try one of the annealing techniques.
Love the Math Art!!
Dizingof
on
May 14, 2012
said:
Weird.. its a 3mm wall thickness..
You might want to check the layer bonding heat on other designs.
If you cool the printed area with a fan, perhaps you need to regulated the fan so the new layer heat-bond to the previous one while they are both hot enough.
Anyways great print , lots more Math Art designs are coming so better fix
that issue ;)
License
Minimal Surface Pencils Holder - Math Art by Dizingof by Dizingof is licensed under the Attribution - Non-Commercial - Creative Commons license.
I could not make it, because 2 of the 4 lower starting points are too high and do not adhere to the base. Too bad...