Loading

Mouse Trap Deluxe

by DLPlanes, published

Mouse Trap Deluxe by DLPlanes Apr 17, 2010

Description

This is my first ever 3D Design I do, its a Mouse Trap. Its a complex design, now its should be all perfectly scaled, and all the parts should fit together. Even dough I took more then 1 day designing it and doing it, I don't know if its going to print perfectly because I don't have a 3D printer or a MakerBot. But I'm very confident its all going to work out fine, to assemble it just read the Instructions below. Open the pictures to see them more clearly.

Recent Comments

view all

Well, I don't real know if you could print it. but the maximum dimensions that a MakerBot can print is 100mmx100x130mm. And this measures 60x115x115mm but there is a way to print it. Its in the way you position it, stand it up, on its side ect.

While this do not appear like I could print it on my makerbot, it does seem cool, I did add the "Mousetrap" tag so it will be found with the other mousetraps.

Liked By

view all

License

All Rights Reserved
Mouse Trap Deluxe by DLPlanes is licensed under the All Rights Reserved license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Ok so in this whole project there are only five parts, the body, the cover, the spinner, and the lock with the screw.
The body it the biggest part, the cover slides in the top of the body to cover the big hole on top. The spinner is whats goes in the center of the body, and the lock goes where theres a hole for the a screw to enter. See the pictures on the side and it'll help you understand.

Thanks for taking your time and downloading,
and making this project.

Comments

You must be logged in to post a comment.

Bophoto on Apr 17, 2010 said:

While this do not appear like I could print it on my makerbot, it does seem cool, I did add the "Mousetrap" tag so it will be found with the other mousetraps.

DLPlanes on Apr 17, 2010 said:

Well, I don't real know if you could print it. but the maximum dimensions that a MakerBot can print is 100mmx100x130mm. And this measures 60x115x115mm but there is a way to print it. Its in the way you position it, stand it up, on its side ect.

Top